Independent Pulling News http://www.pulloff.com/phorum/index.php Sat, 31 Oct 2026 10:55:16 -0700 Phorum 5.2.23 http://www.pulloff.com/phorum/read.php?3,356872,356872#msg-356872 http://www.pulloff.com/phorum/read.php?3,356872,356872#msg-356872
Custom stack covers make great Christmas gifts! Order early to get them in time for Christmas! Covers are made out of marine vinyl that has UV stabilized pigment, a cold crack of -10 degrees, and is mildew resistant. Covers are available in black, red, orange, green and blue. I also have most tractor logo patches and embroidery is available. Covers start at $50. To place an order call or text 815/866-9601 with the following details .

1. Name and address
2. Color
3. Straight or tapered top
4. Dimensions
5. Patch and/or embroidery]]> lenorelynn For Sale Sat, 31 Oct 2026 10:05:15 -0700 http://www.pulloff.com/phorum/read.php?3,356870,356870#msg-356870 http://www.pulloff.com/phorum/read.php?3,356870,356870#msg-356870 Nothing wrong with it worked great, switching classes and can’t use it.
$2500 with both housings
$2200 with one housing
Will ship
Call/text 240520193five]]> Krafterized 1466 For Sale Sat, 31 Oct 2026 05:09:23 -0700 http://www.pulloff.com/phorum/read.php?3,356867,356867#msg-356867 http://www.pulloff.com/phorum/read.php?3,356867,356867#msg-356867 Txt 573 383 4424 for more info]]> B.b Motorsports For Sale Fri, 30 Oct 2026 21:23:50 -0700 http://www.pulloff.com/phorum/read.php?3,356862,356862#msg-356862 http://www.pulloff.com/phorum/read.php?3,356862,356862#msg-356862 D17BROWN For Sale Fri, 30 Oct 2026 16:05:46 -0700 http://www.pulloff.com/phorum/read.php?3,356861,356861#msg-356861 http://www.pulloff.com/phorum/read.php?3,356861,356861#msg-356861 Head work – springs, valve work, porting, etc.
Cut/Coated pistons
Cut (new) sleeves and fire-ringed
Vogel custom ground camshaft – spec’d for 3K RPM
Upgraded head bolts
Upgraded rod bolts
Clevite bearings
Crank driven oil pump engine

No air, fuel, manifolds, or accessories. Long-block only: “Valve cover to oil pan”. $11,500 – Strong running engine. Ran with a data logger, and assembled with good parts from Riverside and others. The engine is still in the tractor. Interested buyers can come see/hear it run. Also can send videos of it running 7th and 8th gear. No issues with it. Only selling to change classes for next season.

Also have some spare parts that can be sold with it:
a couple of turbo’s (that were ran on it)
factory 619 intake manifold / intercooler
factory 619 water manifold / thermostat housing

Email bbjd6101@gmail.com if interested.

Thanks.]]> BigBlockDeere For Sale Fri, 30 Oct 2026 12:06:57 -0700 http://www.pulloff.com/phorum/read.php?3,356859,356859#msg-356859 http://www.pulloff.com/phorum/read.php?3,356859,356859#msg-356859
Thanks for the space!!!
Craig Harnish
Call or text Eight15-seven39-36zero2
Email. ihlss666@gmail.com]]> IHC686 For Sale Fri, 30 Oct 2026 09:20:48 -0700 http://www.pulloff.com/phorum/read.php?2,356858,356858#msg-356858 http://www.pulloff.com/phorum/read.php?2,356858,356858#msg-356858 The Original Michael Pulling Forum Sat, 31 Oct 2026 09:22:50 -0700 http://www.pulloff.com/phorum/read.php?3,356857,356857#msg-356857 http://www.pulloff.com/phorum/read.php?3,356857,356857#msg-356857 Call 9054492241]]> Kingpin For Sale Fri, 30 Oct 2026 08:46:26 -0700 http://www.pulloff.com/phorum/read.php?3,356856,356856#msg-356856 http://www.pulloff.com/phorum/read.php?3,356856,356856#msg-356856 I have a parts set you can install in your carrier if its good, $650.00
These parts will work in 1170-75 if your carrier is good
715-308-2163]]> rdl1953 For Sale Fri, 30 Oct 2026 06:40:05 -0700 http://www.pulloff.com/phorum/read.php?3,356855,356855#msg-356855 http://www.pulloff.com/phorum/read.php?3,356855,356855#msg-356855 Todd Davidson For Sale Fri, 30 Oct 2026 06:06:11 -0700 http://www.pulloff.com/phorum/read.php?3,356854,356854#msg-356854 http://www.pulloff.com/phorum/read.php?3,356854,356854#msg-356854 WILDCHILD For Sale Thu, 29 Oct 2026 14:29:58 -0700 http://www.pulloff.com/phorum/read.php?3,356852,356852#msg-356852 http://www.pulloff.com/phorum/read.php?3,356852,356852#msg-356852 Aluminum sheet metal
Corsa Data logger
Top to bottom engine by Marlatt Engines and dyno
Very strong competitive tractor
3 speed transmission
Not a dime spared on this tractor
Pro pullers by Chad Mayhill
$140,000
John Deere 4760 know as “Son of a Buck”
Corsa data logger
3 speed
Top to bottom engine by Lambs tractor repair
Pro Pullers
Whatever the tractors needed they’ve gotten.
$120,000
Rushville Indiana
765-561-0835
Call for inquiries
Text for pictures and videos]]> Stewart For Sale Thu, 29 Oct 2026 08:35:44 -0700 http://www.pulloff.com/phorum/read.php?3,356851,356851#msg-356851 http://www.pulloff.com/phorum/read.php?3,356851,356851#msg-356851 jeremyroff For Sale Thu, 29 Oct 2026 08:14:16 -0700 http://www.pulloff.com/phorum/read.php?3,356850,356850#msg-356850 http://www.pulloff.com/phorum/read.php?3,356850,356850#msg-356850 - FVP P-pump .093 lines with billet clamps….sold
- injector return kit…sold
- R26047 Rods with REI bolts……$600
- Riverside roller rocker assembly. 3 clearanced hold downs included…..$1700
- 8.1 plastic valve cover with gasket altered to clear roller rockers….sold
- 7810 exhaust manifold, has a few cracks near the turbo flange but could be welded easily…..sold
- R86427 solid filled head. Upgraded springs from Riverside….$1000
- Riverside head studs…..sold
- Remote mount oil filter bracket with hoses and external adjustable regulator. Gives plenty of room for P-pump adjustments. Mounts to factory holes. Includes gasket, 6 filters, and hardware….$600
- 12” Damper…$300
- Ace chassis aluminum front hubs. Has bearing races. 5x4.75 bolt pattern. Only used for mockup….$200
- R51822 clutch housing….$500
- Apex 3x3 1.28 exhaust housing t4. Only 1 run…$400
- 7” compressor inlet cross with clamp…sold

Located in western NY but can ship on buyers dime. Call or text anytime 860-two27-five31five]]> cbj3363 For Sale Thu, 29 Oct 2026 07:07:43 -0700 http://www.pulloff.com/phorum/read.php?3,356849,356849#msg-356849 http://www.pulloff.com/phorum/read.php?3,356849,356849#msg-356849 Strong running tractor
Has Bandit wheelie bars, tie bars and hitch
Could come with a 466 engine or 8.1
or sell as a rolling chassis
Rursch wet clutch with a heavy 2 speed
Scatter blanket and lots more
Located in WI
Can get pictures/videos and more info to serious inquires, Call or text 608-379-3230]]> jd-4440 For Sale Thu, 29 Oct 2026 07:00:31 -0700 http://www.pulloff.com/phorum/read.php?3,356848,356848#msg-356848 http://www.pulloff.com/phorum/read.php?3,356848,356848#msg-356848 Harts 4.6 turbo came off lite pro. Comes with intake and exhaust stars, intake bell with slide. - $3500.
Helm steering pump- $100.
Buyer pays shipping.
Bobby Maxwell
412.629.4170]]> wm.maxwell For Sale Thu, 29 Oct 2026 05:30:31 -0700 http://www.pulloff.com/phorum/read.php?2,356847,356847#msg-356847 http://www.pulloff.com/phorum/read.php?2,356847,356847#msg-356847 Jj Pulling Forum Thu, 29 Oct 2026 11:47:25 -0700 http://www.pulloff.com/phorum/read.php?3,356846,356846#msg-356846 http://www.pulloff.com/phorum/read.php?3,356846,356846#msg-356846 hayes73 For Sale Wed, 28 Oct 2026 19:19:10 -0700 http://www.pulloff.com/phorum/read.php?3,356845,356845#msg-356845 http://www.pulloff.com/phorum/read.php?3,356845,356845#msg-356845 724-493-7580.]]> Graham For Sale Wed, 28 Oct 2026 18:53:55 -0700 http://www.pulloff.com/phorum/read.php?4,356844,356844#msg-356844 http://www.pulloff.com/phorum/read.php?4,356844,356844#msg-356844 John Deere 30-40 series with two speed
Running or not
Turn key or project
Phone Number: 618-214-6886]]> Mike R Wanted Wed, 28 Oct 2026 18:30:34 -0700 http://www.pulloff.com/phorum/read.php?4,356842,356842#msg-356842 http://www.pulloff.com/phorum/read.php?4,356842,356842#msg-356842 Ih966dh Wanted Wed, 28 Oct 2026 16:55:56 -0700 http://www.pulloff.com/phorum/read.php?3,356840,356840#msg-356840 http://www.pulloff.com/phorum/read.php?3,356840,356840#msg-356840 505 engine
8 passes on brand new 20.8 holeshots and kizer wheels from hawthorn
2 passes on a engine line bore and crank checked out. Crank is turned 10 and 10 under
Riverside sleeves and pistons
Head all checked out and fresh back from riverside
Open rpm roller cam
Billet rods
Girdle
Aviad 3 stage pump
Electric water injection
Harts 14mm big cam injection pump
Harts triple feed injectors new in 2024
Harts 3x3.5 turbo. 4 runs since gone through
Back 40 data logger
3 disk pedal clutch
3 speed transmission and needled rear end. 21-20-18.5 are gear ratios
New clutch blanket in 2024
Cage is Ntpa certified
7920 sheet metal
Brand new frame rails and a wirach air ride front end.
Can’t build one for this price

Put the new turbo update on it and do some tuning and go pulling

99,000 obo located west central Ohio
Can make it cheaper if I keep the rear tires and rims!

Call or txt 9three7-538-zero4zero7]]> Cole1566 For Sale Wed, 28 Oct 2026 15:37:15 -0700 http://www.pulloff.com/phorum/read.php?2,356839,356839#msg-356839 http://www.pulloff.com/phorum/read.php?2,356839,356839#msg-356839 Anonymous Pulling Forum Wed, 28 Oct 2026 15:25:39 -0700 http://www.pulloff.com/phorum/read.php?4,356835,356835#msg-356835 http://www.pulloff.com/phorum/read.php?4,356835,356835#msg-356835 Doug 519-525-2347 Text or Call
jdruston@hurontel.on.ca]]> jdruston Wanted Wed, 28 Oct 2026 12:52:32 -0700 http://www.pulloff.com/phorum/read.php?2,356834,356834#msg-356834 http://www.pulloff.com/phorum/read.php?2,356834,356834#msg-356834

When will the NTPA post the rules for next season, and will they modify them before the season starts?

Will the NTPA work with PPL to get more uniform rules?

Will we see some GN classes, Unl. Mods, DSS, at some select Outlaws events? Likewise will some GN events see Outlaw classes?

Will SF be on the GN schedule, or will it become a state/ regional class?

Will PPL run a full CT schedule?

Will state organizations stay with PPL?

Will we see any high dollar events? If so, will Simon's run their successful event, and will others follow?

What effect will fuel prices have on pulling, and will it also cause fans to be more selective on their choice of events?

What will NTPA do about the component chassis on the Lt.PS class and the rule that will allow any engine, any sheet metal?

]]> Dick Morgan Pulling Forum Sat, 31 Oct 2026 04:56:05 -0700 http://www.pulloff.com/phorum/read.php?3,356832,356832#msg-356832 http://www.pulloff.com/phorum/read.php?3,356832,356832#msg-356832 deere414 For Sale Wed, 28 Oct 2026 12:14:25 -0700 http://www.pulloff.com/phorum/read.php?4,356831,356831#msg-356831 http://www.pulloff.com/phorum/read.php?4,356831,356831#msg-356831 Bilger30 Wanted Wed, 28 Oct 2026 06:06:08 -0700 http://www.pulloff.com/phorum/read.php?3,356829,356829#msg-356829 http://www.pulloff.com/phorum/read.php?3,356829,356829#msg-356829 REDDOG For Sale Tue, 27 Oct 2026 19:38:04 -0700 http://www.pulloff.com/phorum/read.php?3,356828,356828#msg-356828 http://www.pulloff.com/phorum/read.php?3,356828,356828#msg-356828 REDDOG For Sale Tue, 27 Oct 2026 19:34:17 -0700 http://www.pulloff.com/phorum/read.php?3,356827,356827#msg-356827 http://www.pulloff.com/phorum/read.php?3,356827,356827#msg-356827 Red River For Sale Tue, 27 Oct 2026 19:20:32 -0700